You may want to periodically clean the fixture using a mild, non-abrasive glass cleaner and soft
cloth. Do NOT use solvents or cleaners containing abrasive agents. When cleaning the fixture,
make sure you have the power turned off and do not spray liquid cleaner directly onto the bulb,
socket, ballast, or wiring.
CARE AND MAINTENANCE
TROUBLESHOOTING
Minor problems often can be fixed without the help of an electrician. Before doing any work on the
fixture, shut off power supply at the circuit breaker panel to avoid electrical shock.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
1. Batteries are defective.
2. Battery compartment cover
is loose.
3. Batteries installed wrong.
1. Changes in meteorological
conditions.
1. Dusk-to-Dawn setting is set
incorrectly.
2. Setting has been set to “OFF.”
1. Depleted batteries.
2. Momentary heat source or
reflective body.
1. Minor sensor problem.
2. Reflective body in detection
area.
1. Heat source in detection area.
1. Photo sensor is picking up
extraneous light.
1. Replace batteries.
2. Check battery compartment
cover.
3. Install batteries correctly.
1. Adjust sensor’s position.
1. Adjust Dusk-to-Dawn setting.
2. Check setting.
1. Check or replace batteries.
2. Turn sensor detection field away
from source.
1. Remove batteries to reset sensor.
2. Remove reflective body or move
fixture.
1. Remove heat source or move fixture.
1. Reset photo sensor settings.
Fixture doesn’t light.
Detection range
varies from day to day.
Motion sensor activates
during daylight.
Motion sensor does
not activate at all.
Motion sensor
activates at random
or for no reason.
Fixture on all night.
Light flickers on
and off.
Lowes.com
6
To Next Page
Loading...
