Utilitech Motion Sensor Light Control UT-5105-BZ User Manual (English)

To Next Page

Motion Sensor Light

Control

Light Control

Sensor

Cover

Plate

Bulb Holders

2 Wire

Connectors

6 Screws

(3 sizes included)

Gasket

2 Shells

Questions or problems? Before returning to your re-

tailer, refer to the troubleshooting guide in this manual

or call our technical service department at 1-800-858-

8501 (English speaking only), 7:30 am to 4:30 pm, CST,

Monday – Friday.

Features

• DualZone™ Technology.

• Turns on lighting when motion is detected.

• Automatically turns lighting off.

• DualBrite

Timer.

• Photocell keeps the lighting off during daylight hours.

• LED indicates motion was sensed (day or night).

Requirements

• The light control requires 120-volts AC.

• If you want to use the Manual Mode, the control must

be wired through a switch.

• Some codes require installation by a qualiﬁed

electrician.

• This product is intended for use with the enclosed

gasket and with a junction box marked for use in wet

locations.

Mounting Bolt

Mounting Strap

Rubber Plug

Plastic Hanger

TEST

TEST 1 5 20

ON-TIME

Off 3 6 Dusk to

Dawn

DualBrite

Put ON-TIME switch

on the sensor bottom

to TEST and the Dual-

Brite

switch OFF.

OPERATION

* resets to Auto Mode at dawn.

MANUAL MODE

ON-TIME

TEST 1 5 20

... back on.

AUTO

1 Second OFF

then...

Note: When ﬁrst turned on wait about 1

minutes for

the circuitry to calibrate.

Package Contents

Manual mode only works at night

because daylight returns the sensor

to AUTO.

Flip the light switch off for one second

then back on to toggle between AUTO

and MANUAL MODE.

Manual mode works only with the

ON-TIME switch in the 1, 5, or 20

position.

Put the ON-TIME switch in the 1, 5,

or 20 minute position.

Items Models

247580 UT-5105-BZ

182155 UT-5105-WH

Mode: On-Time Works: Day Night

Test

5 Seconds x x

Auto

1, 5, or 20 Min x

Manual

To Dawn* x

Accent

3, 6 Hr, to Dawn x

Meets the ENERGY STAR

guidelines

when DualBrite

function is off and

ON-TIME is 1 or 5 minutes and when

used with 120 W Max bulbs.

Need help?

Do you have a question about the Utilitech Motion Sensor Light Control UT-5105-BZ and is the answer not in the manual?

Utilitech Motion Sensor Light Control UT-5105-BZ Specifications

General

Brand	Utilitech
Model	UT-5105-BZ
Category	Home Safety Product
Type	Motion Sensor Light Control
Finish	Bronze
Power Source	Hardwired
Light Sensor	Yes
Mounting Type	Wall Mount
Bulb Type	Incandescent, LED, CFL
Voltage	120V
Light Sensitivity	Adjustable
Material	Plastic
Color	Bronze
Time Delay	Adjustable, 1-10 minutes