EasyManua.ls Logo

UTRAI JS-5 - Inflating the Vehicle Tire

UTRAI JS-5
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Inflating the Vehicle Tire
Please read safety instructions carefully before use:
• For safety reasons, the device should be KEPT OUT OF REACH OF CHILDREN.
• Inspect the JS-5 Jump Starter before each inflates, ensuring the valve and the air
hose are not damaged.
• Do not bend or restrict the air hose while the compressor is in use.
Avoid using in rainy or wet conditions as water entering the unit can cause
internal damage and premature failure.
• In case of an electrical or mechanical fault, immediately switch off and unplug the
compressor.
• Only use on tires and inflatable items.
• Take extra care not to over-inflate when inflating other inflatable items such as
sports ball, bike tires, air bed, etc.
• Please refer to your vehicle handbook for the correct tire pressure required for
your vehicle.
Step 1: Press the OK button to activate the device. Then press the M button to
switch the inflating modes. Press and hold the M button until the pressure unit
flashes and then press it again to switch the pressure unit to PSI, BAR, KPA or
kg/cm².
PSI
USB
BAR KPA
kg/cm
2
IN
DC
OUT
OUT
EN09

Related product manuals