Need help?Do you have a question about the UYIGAO 188D and is the answer not in the manual?
Provides general safety regulations and user manual instructions for safe use of the device.
Ensures meter is undamaged, probe pens are in good condition, and safety rules are followed before use.
Covers correct function selection, range adherence, safe probe handling, and avoiding charged components.
Explains various symbols used in the manual, including warnings, double insulation, and compliance marks.
Identifies the main physical components of the smart meter, including buttons and display.
Details the operation of the power, selection, function keep/torch, and capacitance buttons.
Outlines key specifications including range, overload protection, fuse details, display, and sampling time.
Details DC voltage measuring ranges, resolution, and accuracy specifications.
Details AC voltage measuring ranges, resolution, and accuracy specifications.
Details AC and DC current measuring ranges, resolution, and accuracy specifications.
Details resistance measuring ranges, resolution, and accuracy specifications.
Details capacitance measuring ranges, resolution, and accuracy specifications.
Provides specifications for diode testing, including resolution and function.
Details the circuit continuity test, including resolution and function.
Details temperature measuring ranges, accuracy, and resolution.
Explains how to use the data hold function to freeze the displayed reading and activate the torch.
Details the auto power-off feature, its timing, and buzzer alerts for various conditions.
Covers power-on, battery check, symbol interpretation, and setting the desired function/range.
Instructions for performing AC/DC voltage, resistance, and circuit on/off tests.
Details the procedure for measuring AC and DC current, including safety warnings and fuse checks.
Explains how to perform a diode test, including precautions and expected readings.
Outlines the steps for measuring capacitance, emphasizing capacitor discharge and safety.
Details the procedure for temperature measurement using a K-type thermocouple.
Instructions for identifying live wires and performing non-contact voltage (NCV) detection.
Provides instructions for battery replacement, noting it's rechargeable and requires charging.
Details the procedure and requirements for replacing test leads or probes.
Lists the included accessories such as probes and temperature probes, and the user manual.
General| Continuity Test | Yes |
|---|---|
| Diode Test | Yes |
| Display Type | LCD |
| Maximum Display | 1999 |
| Display Digits | 3.5 |
| Temperature Range | -20°C to 1000°C |
| Safety Rating | CAT II 600V |
| DC Voltage | 200mV/2V/20V/200V/600V |
| AC Voltage | 2V/20V/200V/600V |
| DC Current | 200μA/2mA/20mA/200mA/10A |
| AC Current | 200uA/2mA/20mA/200mA/10A ±(1.2%+3) |
| Resistance | 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ |
| Capacitance | 2nF/20nF/200nF/2μF/20μF/200μF |
| Battery Type | 9V |
To Next Page
