verza manual v1.0 15
Setting 3D (3D surround)
3D mode provides a spacious sound.
[ON] and [OFF] are switched back and forth by pressing the [3D] button.
Setting Gain
Gain of the headphones can be set by switching the GAIN toggle switch to either [HIGH] or [LOW].
It enables the headphones with different impedance to exert its full performance and to play in high-
quality sounds.
* Do not apply force to the GAIN toggle switch to avoid breaking the switch.
How to Reset (restoring factory settings)
In case the operation of VERZA freezes (operation stops), reset VERZA to the factory setting by turning the
volume knob all the way counterclockwise until it clicks, turning OFF the main power, and then turning it
back ON by turning the volume knob clockwise again.
To Next Page
Loading...