EasyManua.ls Logo

V-TAC VT-7562 - User Manual

V-TAC VT-7562
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
WEEE Number
: 80133970
INSTALLATION INSTRUCTION
This marking indicates that this
product should not be disposed
of with other household wastes.
Caution, risk of electric shock.
TECHNICAL DATA
INTRODUCTION
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these
instructions carefully before starting the installation and keep this manual handy for future refer-
ence. If you have any another query, please contact our dealer or local vendor from whom you
have purchased the product. They are trained and ready to serve you at the best. The company
gives no warranty against damage to any surface due to incorrect removal and installation of the
product. This product is warranted for manufacturing defects only.
WARNING!
1. Please make sure to turn off the power before
starting the installation
2. The light source of this luminaire is not replaceable;
when the light source reaches its end of life the whole
luminaire shall be replaced.
MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code
to access the manual in
multiple languages.
TABLE LAMP
2
YEARS
WARRANTY
*
IP54
RATING
MODEL VT-7562
WATTS 2W
LUMENS 200LM
BEAM ANGLE 180°
UNIT COLOR WHITE / BLACK
CABLE LENGTH 1 METER
INPUT VOLTAGE DC:5V, 2A
ADAPTER OUTPUT
[NOT INCLUDED]
DC:5V, 1A~2A
MATERIAL ALUMINIUM
DIMENSION Ø108x325mm
BATTERY CAPACITY 4400mAH
CHARGING TIME 6-8 Hours
WORKING TIME 8-10 Hours
TOCUH DIMMING LEV EL 10~100%
Question and Answer IconNeed help?

Do you have a question about the V-TAC VT-7562 and is the answer not in the manual?

Summary

Introduction

Warnings and Safety

Installation Safety Precautions

Ensure power is off before installation and note electric shock risks.

Product Lifecycle and Disposal

Light source is non-replaceable; follow proper waste disposal guidelines.

Operation Cautions

Operation Guide

Power and Dimming Control

Tap to switch on/off; tap and hold for brightness adjustment.

Color LED Indicator

Red indicates charging; Green indicates battery is fully charged.

Maintenance

V-TAC VT-7562 Specifications

General IconGeneral
ModelVT-7562
CategoryHome Lighting
Luminous Flux806 lm
Color Temperature3000K
Voltage220-240V
Base TypeE27
Lifespan20, 000 hours
Beam Angle200°
CRI>80
PF>0.5
LED Chip TypeSMD
IP RatingIP20
DimmableNo
Starting Time 100%0.5s
On/Off Cycles15, 000
Frequency50Hz
MaterialPlastic
Dimensions60mm x 110mm

Related product manuals