The appliance should be installed by qualified personnel only.
Each step must be carried out and checked in full in the order specified.
Validity
These installation instructions apply to the models: L
(11001), S (11002), SL (11003), SLQ WP (11004), SLQ (11006)
Identification plate
Open the drain tray at the front bottom of the appliance. For
details, see
«1. Opening the appliance door (without power)».
– Identification 1*
* Depending on the serial number (FN)
Applicable only to model SLQ WP (11004)
To avoid damaging the compressor of the heat pump aggregate, in the event that the appliance was tilted during transporta-
tion or installation it is not to be put into operation for two hours.
Installation instructions
«Front loader» washing machine
One-family household
1
J11001113-R05
22/03/2016
To Next Page
Need help?
General
