V2 PROTEO1 User Manual

V2 S.p.A.
Corso Principi di Piemonte, 65/67
12035 RACCONIGI (CN) ITALY
tel. +39 01 72 81 24 11 - fax +39 01 72 84 050
info@v2home.com - www.v2home.com
I
L n. 466
E
DIZ. 08/02/2016
PROTEO1 / PROTEO4
PROTEO6 / PROTEO12
TRASMETTITORE 434,15 MHZ PER TENDE DA
SOLE E TAPPARELLE
434.15 MHZ TRANSMITTER FOR AWNINGS
AND ROLLING SHUTTERS
TRANSMETTEUR 434,15 MHZ POUR SORES
ET VOLETS
TRANSMISOR 434,15 MHZ PARA TOLDOS Y
PERSIANAS
TRANSMISSOR 434,15 MHZ PARA TOLDOS E
ESTORES
SENDER 434,15 MHZ FÜR VORHÄNGEN
ODER ROLLLÄDEN
ZENDER 434,15 MHZ VOOR ZONWERINGEN
EN LUIKEN
I
GB
F
E
P
D
NL

V2 PROTEO1 Specifications

General

Brand	V2
Model	PROTEO1
Category	Transmitter
Language	English

Summary

Sun Sensor Activation

PROTEO1 Sun Sensor Activation

Enables or disables the sun sensor for PROTEO1 by pressing the SUN key briefly or holding it.

PROTEO4 Sun Sensor Activation

Enables/disables sun sensor on PROTEO4 by selecting channel and holding SUN key.

PROTEO6/PROTEO12 Sun Sensor Activation

Enables/disables sun sensor on PROTEO6/12 by pressing STOP and UP/DOWN keys simultaneously.

Remote Control Button Functions

UP, DOWN, and STOP Buttons

Controls automation movement: UP for going up, DOWN for going down, STOP to halt.

PROG Button and DIP-Switches

Programs control units and devices. Refer to specific programming handbook for details.

Channel Selection (SELC Button)

Selects the desired channel for radio transmission. Multiple presses cycle through channels.

Additional Remote Features and Maintenance

Courtesy Light Command

Controls control unit light outputs on compatible models. Operation depends on unit settings.

Group Management (SELG Button)

Programs and selects groups of channels for radio transmission, up to 8 groups.

Battery Replacement

Replace battery when radio range decreases. Respect polarity and dispose of batteries properly.

Compliance Information

EU Declaration of Conformity

V2 SPA declares PROTEO products comply with directives 2014/53/EU and ROHS2 2011/65/CE.