EasyManua.ls Logo

VAC-CON 691-5001 - User Manual

Default Icon
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Vacuum System
Operation and
Maintenance
Manual
691-5001
Section 50
Belt Drive and Hydrostatic Drive
Vacuum Systems
Question and Answer IconNeed help?

Do you have a question about the VAC-CON 691-5001 and is the answer not in the manual?

Summary

General Safety Instructions

Vacuum Breaker Operation

Vacuum Breaker Lubrication

Monthly lubrication is required for the vacuum breaker door assembly shaft.

Vacuum Compressor Operation: Belt Driven (Standard)

Daily Lubrication for Belt Driven Compressor (Standard)

All vacuum compressor grease fittings must be greased daily.

Vacuum Compressor Operation: Belt Driven (Automatic)

Daily Lubrication for Belt Driven Compressor (Automatic)

Daily greasing of all vacuum compressor grease fittings is mandatory.

Vacuum Compressor Operation: Hydrostatic Driven

Daily Lubrication for Hydrostatic Compressor

All vacuum compressor grease fittings require daily greasing.

Vacuum Compressor Drive Belt Maintenance

Drive Belt Adjustment Safety Precautions

Proper belt tightening, tension, and matched sets are crucial for preventing fire, failure, and damage.

Belt Adjustment Procedure

Safety Note: Belt Guards During Adjustment

Never operate the blower without the belt guards in place.

Belt Removal Procedure

Belt Installation Procedure

Safety Note: Belt Guards During Installation

Never operate the blower without the belt guards in place.

VAC-CON 691-5001 Specifications

General IconGeneral
BrandVAC-CON
Model691-5001
CategoryVacuum Cleaner
LanguageEnglish