Need help?Do you have a question about the VAC-CON 691-7001 and is the answer not in the manual?
Step-by-step guide for operating the handgun, including valve adjustments and safety notes.
Detailed steps for operating the debris body flushout system, including valve and throttle adjustments.
Procedure for operating the winter recirculation system, focusing on engine speed and water circulation.
Steps to purge water from the system when it is not equipped with an air purge feature.
Warning regarding water freezing at 32 degrees F and recommendations for storage.
Detailed steps for air purging the water system for specific serial number ranges.
Detailed steps for air purging the water system for specific serial number ranges.
Guide to filling the water tanks and priming the water pump.
Important safety precautions related to hose reel operation and pressurized water handling.
Key considerations for maintaining correct belt tension, including hazards of incorrect tension.
Step-by-step instructions for adjusting and tightening drive belts.
Steps for replacing drive belts, including loosening and adjusting engine mounting.
Identification of key components within a typical swivel joint assembly.
Lists available packing and repair kits for 1" and 1-1/4" swivel joints.
Guidance on routine servicing and adjustment of swivel joint packing for proper sealing.
Detailed steps for disassembling, cleaning, and repacking swivel joints with new parts.
Safety precautions for servicing pumps, including engine shut-off and tool requirements.
Procedures for preparing the water pump for storage, including oil changes and draining.
References for detailed repair procedures and lubrication diagrams.
General| Brand | VAC-CON |
|---|---|
| Model | 691-7001 |
| Category | Water System |
| Language | English |
To Next Page