Trouble shooting
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Symptom Possible cause Action
No power Not connected / Faulty socket
Insuffi cient suction Dust bag is full Replace with new dust bag
Suction hose or tubes blocked Remove suction hose or tubes
tuo naelc dna
Circumference filter is dirty Brush clean circumference filter
Top cover is not fitted correctly Remove and refi t top cover
yltcerroc era sehctal gnirusne
desolc
nwonknU
Vacuum cleaner Vacuum motor has overheated and Check all of the hoses and tubes
switches o in mid the motor protection has activated for blockages, clean all fi lters,
xorppa tiaw dna gab tsud ytpme esu
nwod looc ot rotom rof snim 02
gnitratser erofeb
Check connection to wall socket
and socket switch. Try in another
wall socket.
Replace fuse with approved 13A
fuse
Call for service
Call for service
“
“
“
Fuse blown
Unknown
“
“
“
“
To Next Page
Loading...