begun, discard food. If food spoilage has not yet begun, consume immediately.
If in doubt, discard food.
Pro90 is not sealing bag
▪ The Pro90 features a heat temperature controller. If the sealing component
achieves a high temperature, the seal bar will no longer function, allowing
it to cool down. In this situation, unplug machine and allow it to cool for 3
minutes. Then plug in and resume packaging.
▪ Bags will not seal if any moisture, debris or food particles are present in
the seal area. Wipe the inside of the bag clean and try again.
▪ Bags must be properly placed along the seal bar. Make sure
the entire bag is over the seal bar and there are no wrinkles in bag
material.
Pro90 is not vacuuming canister properly
▪ The accessory hose may not be properly attached. Ensure the hose is
completely attached to the lid of the canister and the accessory port and try
again.
▪ Make sure the canister lid is turned to the “vacuum” setting.
▪ Leave adequate head space at the top of the canister.
▪ Make sure there isn’t any damage to the canister and lid. Sometimes hairline
cracks can develop in canisters. When this happens the canister is no longer
air tight and should be discarded.
14
If problems persist, contact customer support at 800.821.7849 for further
assistance. Thank you for purchasing the all-new VacMaster
®
Pro90.
Happy Vacuuming!
Trouble Shooting
To Next Page
Loading...
