9
Operating Instructions (Continued)
7. Inspect the pouch
r emove the pouch and inspect the vacuum-packaged product.
Check the quality of the vacuum by looking at the tightness of the
pouch and the product. Look for air pockets or air leaks. If you notice that the product is not
vacuum sealed tightly, then increase the vacuum time by 5 seconds and vacuum and
seal again.
Inspect the pouch seal. A positive seal will appear clear upon inspection.
If the seal is spotty or incomplete, increase the seal time by 1 second. If the seal appears
white or milky, decrease the seal time by 1 second. Once the settings are determined for
your application, vacuum and seal again.
If the product is vacuumed and sealed tightly, then the process is complete.
To Next Page
Loading...