Vacmaster vp320 - Filter Maintenance; Changing the Exhaust Filter

17
1. Remove the back panel
2. Remove the screws that hold the Upper Chamber in place - Two located
on the front corners and two located on the back.
3. Pull the chamber assembly back about 3-4 inches
4. 
5. Remove the plate and spring
6. 
7. 
8. Reassemble all of the
pieces in reverse order!
Changing the Filter
Plate
Screws
(Step #4)
Maintenance
ARY, Inc. | 11880 College Blvd Suite 550 Overland Park, KS 66210 | www.VacMasterFresh.com | 800-821-7849
VP320 Chamber Vacuum Sealer | User Guide