10
Set Up - Adjusting the VP540 Timing Controls
Vacuum Time: To increase or decrease the vacuum time, press the SET
button until VACUUM is illuminated and then use the UP/DOWN buttons to
Screen on the control panel.
NOTE: Filler plates can be used to reduce the vacuum time required. Place the
filler plates inside the chamber as desired. Filler plates occupy space, leaving
less air to be removed from the chamber. If you require more space inside the
chamber, remove the filler plates to accommodate your product.
Sealing Time: To increase or decrease the sealing time, press the SET button
the sealing time to accommodate your application. It is recommended
pouch.
NOTE: For thicker pouches, increase the seal time in 0.2 second increments until
the pouch seals completely. In addition, for thinner pouches, decrease the seal
time in 0.2 second increments to avoid over-sealing the pouch.
Cooling Time: To increase or decrease the cooling time, press the SET
button until COOLING is illuminated and then use the UP/DOWN buttons to
NOTE: The VP540 settings will always default to the most recently used settings
on the machine.
To prolong the life of your seal bar, set the
cooling time to twice the sealing time.
TIP:
NOTE: After setting the timing controls, press the SET button until the function
lights on the control panel are no longer illuminated. The machine will not start
until all function lights are off.
1. Select a vacuum chamber pouch
Select the proper size of vacuum chamber pouch for the product that you
are packaging. Make sure that the mouth of the pouch does not exceed
chamber. Allow 3" of extra headspace at the top of the pouch to ensure a
quality, air-tight seal. The VP540 accepts vacuum chamber pouches up
to 18"W x 22"L in size.
How to Use
ARY, Inc. | 11880 College Blvd Suite 550 Overland Park, KS 66210 | www.VacMasterFresh.com | 800-821-7849
VP540 Chamber Vacuum Sealer | User Guide
To Next Page
Loading...
