To Next PageTo Next PageWhat to do if my VacPak-It Kitchen Appliances unit won't turn on?
First, make sure the machine is properly plugged into a grounded outlet. Then, check the power cord for any damage like tears or frays; do not use the machine if the cord is damaged. Finally, ensure the power switch is on; the LED screen should light up when it is.
How to fix VacPak-It Kitchen Appliances not achieving a complete vacuum?
If your VacPak-It Kitchen Appliances unit isn't achieving a complete vacuum, try these steps: * Increase the vacuum time in small increments until you get the vacuum you want. * Make sure the bag's edge is on the seal bar, inside the chamber, without wrinkles, and doesn't go past the chamber. * Ensure the seal is complete and clear. If it's spotty, incomplete, wrinkled, milky, or white, cut the seal and restart. * Clean and dry both the sealer and bag to remove any debris before trying again. Wipe the seal bar and the inside of the bag.
General| Model | ULTIMA 186UVMC12 |
|---|---|
| Category | Kitchen Appliances |
| Type | Vacuum Sealer |
| Chamber Type | Chamber |
| Seal Bar Length | 12 inches |
| Voltage | 120V |
| Pump | Oil Pump |
