VACUFLO Central Vacuum Systems
8
GENERAL INFORMATION
The central vacuum is designed to vacuum ordinary household dirt and
dust. The system is designed for dry pickup. A WetVac accessory is needed
if the system will be used for liquid pickup.
The central vacuum system is a network of inlet valves, 2” PVC tubing,
and low voltage wiring installed in the walls of your home. The dirt is
transported through the in-wall tube system back to the dirt canister
(removable lower portion of the power unit).
REGISTRATION
To register your VACUFLO
®
System warranty in the United States and
Canada, register online at www.cvacregistration.com or fill out and mail
the warranty card located with this manual.
Proof of purchase or registration of your VACUFLO System is required
before any warranty work will be performed by an authorized VACUFLO
dealer. Registration ensures a fast and easy resolution to your warranty
requirements.
OPERATING INSTRUCTIONS
Using the central vacuum system is easy. For standard systems, simply
raise the inlet valve lid, insert the hose end and attach the desired cleaning
tool to the hose wand. The power unit is activated when the hose is
inserted into the valve. Please refer to accessory instructions for further
specifics on usage.
To Next Page
Loading...
