Configuring A/B Mode and Dual-Bus Mode Transitions Separately 24
Enabling Phantom Power to Microphones 25
Configuring Audio Settings 26
Muting the Microphones 26
Controlling Volume on Individual Inputs or Outputs 27
Default Microphone Settings 28
Microphone Settings for Environments with Audiences 29
Microphone Adjustments 29
Speaker Adjustments 30
Routing Audio 31
Selecting Stream Sources 32
Configuring Streaming Settings 32
Edit the USB Device Name 32
Allow Soft Client Control of the System 32
Enable or Disable Streaming 33
Set IP Streaming Settings 33
Advanced IP Streaming Settings 33
Setting up Macros and Triggers 34
Working with Graphics 35
Configuring Standby Behavior 36
Locking the Front Panel Controls 36
Operating the Switcher 37
Before You Start 37
Selecting Cameras 38
Working with Audio 38
Working with On-Screen Graphics 39
Selecting a PIP Source and Layout 41
Using Camera Presets 42
Using Macros 42
Telnet Serial Command API 43
audio mute 44
audio volume 45
audio route 46
audio crosspoint-gain 47
camera home 48
camera pan 48
camera tilt 48
camera zoom 49
camera focus 50
camera preset 51
camera ccu get 52
iii
Integrator's Complete Guide to the AV Bridge MatrixMIX Multipurpose AV Switcher
To Next Page
