RDA 400S
27.06.2011
ver.2 65
24 Wing locking, Yes/No. Only “No” is used for the RDA 400 S.
25 It is possible to enter user-specific information, e.g., a name. Use the dial to enter char-
acters and digits, and advance using .
26 Setting the display contrast. Use the dial to set the contrast between 0% (lighter) and
100% (darker). (This adjustment is only available on Control Stations with mftg. no. 428030
and program version 1.01 or later.)
27 OK. Press to complete programming and return to the drive mode.
To Next Page
Loading...
