Vaderstad Seed Hawk - Page 31

Air Cart Check
Condition
Check Specication Comments
Ok
Repair
Replace
Hitch pin & safety
chain
Check for wear or damage
Air pack / Manifold
Check for defects & damages
turn primary hoses as required
Bin / Tank Lids
Check condition of seals,
springs and adjust latch as
needed
Fans
Remove covers and check cou-
plings. Inspect sensor for visible
defects
Check tank tires &
steering linkage
Adjust pressures, Check condi-
tion & wheel torque
Power Skid
Check charging system, Inspect
and adjust belt if equipped.
Blow out alternator with
compressed air
Battery
Load test battery, conrm a
adequate CC / CCA is present
Hydraulics Check for leaks
Stair / Handrail
Check condition. Conrm rails
are fastened and secured
Safety decals &
lights
Check all decals for visible
defects / conrm operation
Conveyor Check
Condition
Check Specication Comments
Ok
Repair
Replace
General check over
Conrm belt is not seized before
operation. Check arm for wear
or play
Grease
Grease ll system arm assembly
bushings
Bearings
Check for wear or play. Conrm
bearings aren’t seized
Tension
Check tension before and after
operation. Adjust as required
Remote
Check remote functionality. Pair
remote if necessary
Tracking Check tracking adjust as needed
Condition Check for wear / visible defects
Lights Check function
Safety decals &
lights
Conrm safety decals and shield
are intact