Vaderstad Seed Hawk - Post-Season Storage Guidelines

Post Season
Storage
Condition
Check Specication Comments
Ok
Repair
Replace
Toolbar hydraulics
Coat exposed wing lift cylinders
if stored outdoors
Hydraulic
Relieve hydraulic pressure as
required
Bin / Tank Lids
Remove tension from the lids to
prevent seal damage over winter
Grease Grease as required
Agitators
Lubricate bearings to prevent
seizing
Section Care
Run oor dry through each
section to absorb any excess
moisture
Conveyor
Run oor dry through conveyor,
thoroughly clean and back o
tension. Lubricate joints and
bearings to prevent seizing
Conveyor Remote
Store Indoors, remove from
storage box
Rollers
Remove and wash all rollers.
Place in a controlled environ-
ment
Motors
Remove electric motors, lubri-
cate shafts & reinstall to prevent
seizing
Battery
Remove battery, charge and
store in a heated location
Clean Machine Wash implement as required