Need help?Do you have a question about the Vaillant Air flue duct and is the answer not in the manual?
General| Material | Aluminum |
|---|---|
| Diameter | 60/100 mm |
| Compatibility | Vaillant boilers |
| Approvals | EN 1856-1 |
| Type | Concentric |
| Application | Air supply and flue gas discharge |
Instructions on how to store installation manuals and related documents for future reference.
Explanation of symbols used in the manual, including danger, caution, and notes.
Specifies the boilers for which this installation manual is valid.
Details regulations and standards that must be observed during installation.
Guidance on planning the air/flue duct layout, including available accessories.
Detailed descriptions and diagrams of various flue duct components and accessories.
Tables showing maximum permitted flue lengths for different ecoTEC exclusive models.
Tables detailing maximum permitted flue lengths for various ecoTEC models.
Instructions for installing a sliding sleeve to accommodate movement in flue installations.
Instructions for installing the horizontal air/flue duct system.
Instructions for installing the telescopic horizontal air/flue duct system.
Instructions for installing the black terminal kit for horizontal air/flue ducts.
Instructions for installing the Variable Termination Kit (VTK) for flue systems.
Instructions for installing the deflector set for flue gas pipes.
Instructions for installing the vertical air/flue duct system.
Instructions for installing the ridge tile terminal for flue systems.
Guidance on fitting air/flue duct extensions and elbows to the system.
Details regulations and standards for installing the Ø 80/125 system.
Guidance on planning the air/flue duct layout for the 80/125 system.
Describes the components for the optional Ø 80/125 concentric system.
Tables showing maximum flue lengths for ecoTEC exclusive with 80/125 system.
Tables showing maximum flue lengths for ecoTEC with 80/125 system.
Instructions on how to change the appliance connection piece for the 80/125 system.
Instructions for installing a sliding sleeve for the 80/125 system.
Instructions for installing the horizontal air/flue duct for the 80/125 system.
Instructions for installing the vertical air/flue duct for the 80/125 system.
Guidance on fitting air/flue duct extensions and elbows for the 80/125 system.
To Next Page