EasyManua.ls Logo

Vaillant sensoNET VR 921 - Electric shock safety precautions; Required qualifications for installation; Tool usage for material damage prevention; Observing safety information references

Vaillant sensoNET VR 921
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 Installation instructions 0020285487_05
Installation
Start-up
Inspection and maintenance
Repair
Decommissioning
Proceed in accordance with
current technology.
Validity: Russia
The competent person must be
authorised by Vaillant Group
Russia.
1.3 Risk of death from electric
shock
There is a risk of death from
electric shock if you touch live
components.
Before commencing work on
the product:
Unplug the mains plug.
Or disconnect the product
from the power supply by
switching off all power sup-
plies (electrical partition with a
contact gap of at least 3 mm,
e.g. fuse or circuit breaker).
Secure against being
switched back on again.
Wait for at least 3 minutes un-
til the capacitors have dis-
charged.
Check that there is no
voltage.
1.4 Qualification
Only qualified electricians may
carry out the electrical installa-
tion.
1.5 Risk of material damage
caused by using an
unsuitable tool
Use the correct tool.
1.6 Observing the safety
information
Validity: Russia OR Ukraine
Observe the safety informa-
tion in the section "Country-
specific information".
1.7 Safety warning Power
supply unit
The power supply unit that is
provided must only be used
indoors.
Do not operate the power
supply unit in wet environ-
ments or in the rain.
If the power supply unit has
visible damage or is defect-
ive, you must not operate it.
Keep the power supply unit,
its individual parts and the
packaging material away from
children.
Only connect the power sup-
ply unit if the mains voltage
for the plug socket matches
the information on the data
plate.

Related product manuals