Need help?Do you have a question about the Vaillant timeSWITCH VTS 160 and is the answer not in the manual?
General| Operating voltage | 230 V AC |
|---|---|
| Frequency | 50 Hz |
| Battery backup | Yes |
| Protection class | IP20 |
| Type | Digital |
| Switching capacity | 16 A (resistive) |
| Number of switching times per program | 2 |
| Dimensions (H x W x D) | 90 mm |
| Operating temperature | 0°C to +50°C |
Instructions must be observed alongside other relevant system documents for proper installation.
Installation instructions and other documents should be passed to the system operator for safekeeping.
Explanation of symbols used in the text for identifying information, dangers, and required actions.
Specifies the article numbers for which these installation instructions are valid.
Details compliance with EU directives for electromagnetic compatibility and low voltage.
General guidance on safety instructions and warning notes to be observed before performing actions.
Details how warning notes are classified based on danger signs and signal words.
Explains the format of warning signs, including signal word, danger type, and preventive measures.
Defines the proper use of the timeSWITCH timer and the permissible components and accessories.
Outlines essential safety measures for installation, including competent person requirements and room conditions.
Specifies that all wiring must comply with Building Regulations Part P and BS 7671.
Illustrates the physical connection of the timeSWITCH timer to the boiler system.
Explains how the timer controls heating installation and hot water production through programmed periods.
Describes the location and content of the timer's identification plate, including appliance designation and voltage.
Lists the components included in the delivery to ensure everything is present before installation.
Provides step-by-step instructions for connecting the timer to the boiler's electronic box.
Guides on setting date, time, heating modes, and hot water production periods via the operator level.
Details functions available at the operator level, such as language selection and time programme setup.
Explains error messages displayed on the timer and their potential causes and connected appliances.
Lists common faults like a dark display or unresponsive controls and their corresponding causes.
Information on how to reset the timer's settings back to their original factory configuration.
Provides safety precautions and steps for removing and replacing the timer unit.
Guidance on the proper disposal of the timer unit and its packaging according to environmental regulations.
Details the conditions for granting a Vaillant manufacturer's warranty, requiring qualified installation.
Recommends arranging for regular servicing and contacting Vaillant Service Solutions for maintenance.
To Next Page
