Need help?Do you have a question about the Vaillant timeSWITCH 140 and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Number of Programs | 3 |
| Voltage | 230 V |
| Mounting | Wall-mounted |
| Operating Voltage | 230 V AC |
| Frequency | 50 Hz |
| Switching Capacity | 16 A |
| Battery Backup | Yes |
| Protection Class | IP20 |
| Weight | 0.2 kg |
| Type | Digital |
| Programming | Daily and weekly |
| Operating Temperature | 0°C to +45°C |
| Storage Temperature | -20°C to +60°C |
Guidelines for preserving the manual for future reference and accessibility.
Explanation of safety and information symbols to ensure proper comprehension of manual content.
Defines the product versions and article numbers covered by this operating manual.
Specifies the approved applications and primary function of the timeSWITCH 140 timer.
Highlights the mandatory requirement for installation by a qualified heating engineer.
Identifies and describes the function of physical controls like the dial and buttons.
Details the icons, indicators, and information presented on the device's screen.
Step-by-step guide to accurately set the device's current date and time for operation.
Information on the pre-configured heating and hot water control programs.
Detailed instructions for creating custom heating and hot water schedules for daily and weekly use.
Guide to selecting between automatic, heating-only, or off modes for the system.
Explanation of how to activate and use special functions like Party and Holiday modes.
Details on enabling automatic summer/winter time changeover via the calendar function.
Key considerations and warnings for qualified installers regarding device setup and initial operation.
Explanation of the CE label and its meaning for product compliance and directives.
Clarifies the specific applications and limitations for the timeSWITCH 140 during installation.
Critical safety warnings, including precautions against electrical damage and short-circuits.
Specifies the relevant building and electrical wiring regulations that must be adhered to.
Procedure for accessing the installer level to set the device's calendar and current date.
Instructions on how to enter the service level for diagnostics and software version checks.
To Next Page
