8
Operating and installation instructions 0020248967_00
a
Safety
a
1
1.3.2 Risk of material damage
caused by frost
> Do not install the product in rooms
prone to frost.
1.3.3 Risk of material damage
caused by unsuitable
environmental conditions.
The electronics may be damaged if you
install the product in an unsuitable envi-
ronment.
> Only install the product in dry, dust-free
rooms.
> Ensure that the product is not exposed
to constant solar or heat irradiation,
vibrations or mechanical loads.
1.3.4 Regulations (directives, laws,
standards)
> Observe the national regulations, stand-
ards, guidelines and laws.
To Next Page
Loading...
