Need help?Do you have a question about the Vaillant VU 246/5-5 (H-GB) ecoTEC plus 624 and is the answer not in the manual?
General| Model | VU 246/5-5 (H-GB) ecoTEC plus 624 |
|---|---|
| Category | Boiler |
| Type | Combination Boiler |
| Output | 24kW |
| Dimensions | 720 x 440 x 338 mm |
| Weight | 36 kg |
| ErP Rating | A |
| Fuel Type | Natural Gas |
| Warranty | 5 years |
| Efficiency | 94% |
| Flue Options | Horizontal or vertical |
| Central Heating Flow Temperature Range | 30°C to 80°C |
Classification of warning symbols and signal words used for potential dangers.
Specifies the product's intended purpose as a heat generator and hot water generator.
Provides general safety guidelines and precautions for using the product.
Instructions for dealing with suspected flue gas leaks.
Prohibits storage of flammable materials in the installation room.
Warns against modifying safety devices or product components.
Highlights the need for adequate combustion air supply.
Warns about corrosive substances affecting the product.
Advises on measures to prevent frost damage to the heating system.
Stresses the importance of professional maintenance and repairs.
Advises users to follow instructions for all system components.
Recommends keeping manuals and documents safe for future reference.
Lists the specific product article numbers to which these instructions apply.
Shows a diagram illustrating the product's external components and labels.
Identifies the main buttons and display elements on the product's control panel.
Details the symbols and their meanings on the operator control panel.
Explains various symbols shown on the product's display and their meanings.
Lists information found on the product's identification plate and its meaning.
Indicates where to find the product's serial number.
Explains the meaning of the CE label and conformity.
Describes the benefits of products endorsed by the Energy Saving Trust.
Mentions Vaillant's membership and promotion of the Hot Water Association.
Explains the Benchmark scheme for quality installation and servicing.
Outlines the basic functions of the operator control elements and their use.
Describes the default screen showing the product's current condition.
Explains the structure and navigation of the product's menu system.
Differentiates between user and installer levels for settings and information.
Advises against self-installation of casing and recommends consulting specialists.
Instructs users to consult installers for isolator device operation.
Specifies that the product should only be started after the casing is closed.
Details the procedure for turning the product on using the on/off button.
Provides steps for changing the display language on the product.
Guides users on adjusting the temperature for the heating circuit.
Explains how to set the desired hot water temperature, including warnings.
Describes how to activate or deactivate the Comfort mode for hot water.
Explains how to activate cylinder charging for hot water generation.
Instructs on setting the maximum temperature for the hot water cylinder.
Details how to disable heating while keeping hot water function active.
Explains how to disable hot water generation for specific product types.
Guides on how to check the current and required filling pressure of the heating system.
Provides instructions and cautions for refilling the heating system with water.
Directs users to tables for fault diagnosis and resolution.
Explains how to view current operating status codes on the display.
Highlights the necessity of annual inspections by a competent person.
Provides instructions on cleaning the product's casing safely.
Explains how to interpret maintenance indicators on the display.
Advises regular checks of the condensate drain for blockages.
Details how to temporarily switch off the product, with frost warnings.
States that permanent decommissioning must be done by a competent person.
Instructs on proper disposal of the product and batteries according to regulations.
Explains the terms of the two-year guarantee and annual service requirement.
Recommends making arrangements for regular servicing and maintenance.
Lists settings and parameters accessible at the operator level.
Provides a list of status codes and their meanings for various operating modes.
Presents a table of common faults, their causes, and recommended measures.
To Next Page
