Folding Operation Illustration
1: Unscrew the plastic safety buckle on the
standpipe quick release, and then release the
quick release, and the riser can be folded to
the left
2: The standpipe upper and lower adjustable
quick releases can adjust the height of the
standpipe.
3: The handlebar adjustable quick release
can adjust the handlebar direction
4: Release the upper and lower
adjustable quick releases of
the seat tube to adjust the seat
tube to the lowest position.
Pull out
6: Then pull the folding shackle out to fold the frame
5: First, turn the safety buckle of the folding device all the
way to the right
State of Frame After Folding
7: Press the pedal inward with hand, and then flip it up to fold
Push in
State of Pedal
After Folding
Note: The pedals are not installed at the factory and can
be installed by using the special wrench coming with
the vehicle.
Note when installing the pedals:
The pedal with "R" symbol is the right pedal,
and that with the "L" symbol is the left pedal.
EN 05
To Next Page
Loading...
