To Next PageTo Next Page
Need help?Do you have a question about the Val-Matic 48A and is the answer not in the manual?
Instructions for inspecting, handling, and storing valves upon receipt to prevent damage.
Explains how the valve automatically removes air pockets at high points in piping systems.
Details the standard construction of the valve body, cover, and internal components.
Periodic inspection to verify operation and check for leaks or air release issues.
The valve is self-contained and does not require lubrication for operation.
No special tools are needed for maintenance or repair of the valve.
Details the procedure for backwashing the valve using a clean water supply.
Solutions for leaks at the valve's threaded connection, including tightening and sealant.
Addresses cover leaks by tightening bolts or replacing the gasket.
Troubleshooting for valve leaks when closed, involving backwashing and inspecting parts.
Checks operating pressure and suggests backwashing if the valve is not venting air.
General| Brand | Val-Matic |
|---|---|
| Model | 48A |
| Category | Control Unit |
| Language | English |
