25
EN
Using the appliance
B
4. Remaining time indicator
The programme ow can be monitored via the Wash, Rinse Dry and End indicators on the
remaining time indicator.
5. Start/Pause button
Press the Start/Pause button to start the programme. The washing light turns on and the
remaining time indicator shows the duration of the programme. It also shows the time remaining
during the programme. If you open the door of your appliance while the programme is running,
the appliance will pause and the indicator for the linked wash stage will ash.
6. Options button
The options can be selected by repeatedly pressing the Options button. The selected option
will be indicated by a ashing LED.
7. Selection button
Select the option by pressing the select button. The LED for the selected option will then stay on.
8. Salt indicator
When there is not enough softening salt, the low salt warning indicator lights up and you have
to rell the salt tank.
9. Rinse aid indicator
When the rinse aid level is low, the corresponding warning indicator turns on and you must
rell the rinse aid tank.
10. Tablet mode indicator
Select the Detergent Tablet function when using a combination detergent containing salt,
rinse aid and additional properties. The detergent tablet indicator remains lit as long as the
option is selected.
11. Extra Hygiene Mode Indicator
Select the Extra Hygiene function to increase the washing temperature for maximum washing
performance. The additional hygiene indicator turns on.
12. Half-load indicator
Select the half load function to choose the area of the dishwasher containing the dishes to be
washed. You can select both racks, or the upper rack or lower rack only. Press the button until
the indicator for the rack containing the dishes to be washed turns on. The half-load indicator
turns on while this function is in operation. Dishes placed in other areas will not be washed.
To Next Page
Loading...
Need help?
General
