9 FR
Using the appliance
B
Standard supply hose
WARNING : A hose connected to a sink sprayer can burst if it is installed in the same
water line as the dishwasher. If your sink is equipped with one, it is recommended to
disconnect the pipe and plug the hole.
How to disconnect the safety supply hose?
1. Shut off the water supply.
2. Unscrew the safety supply hose from the tap.
Drain hose connection
• Insert the drain hose into a drain pipe with a minimum diameter of 4 cm, or let it run into
the sink, taking care not to bend or pinch it.
• The height of the drain pipe should not exceed 1000 mm.
• The free end of the hose should not be immersed in water to avoid backow.
WARNING : Ensure that the drain hose is securely fastened either in
A
position or in
B
position.
To Next Page
Loading...
