39
EN
Useful information
C
FAILURE
CODE
POSSIBLE FAILURE WHAT TO DO
FF
Failure of the water supply
system
Ensure that the water inlet tap is open and
that the water is flowing.
Separate the inlet hose from the tap and clean
the hose filter.
If the error persists, contact the after sales
department.
F5 Failure of the pressure system Contact the after sales department.
F3 Continuous water supply
Turn off the tap and contact the after sales
department.
F2 Unable to drain water
The water drain and filters may be blocked.
Cancel the programme.
If the error persists, contact the after sales
department.
F8 Heating error Contact the after sales department.
F1 Overflow
Unplug the appliance and turn off the tap.
Contact the after sales department.
FE Defective circuit board. Contact the after sales department.
F7 Overheating Contact the after sales department.
F9 Divider position error Contact the after sales department.
F6 Faulty temperature sensor Contact the after sales department.
HI High voltage error Contact the after sales department.
LO Low voltage error Contact the after sales department.
Automatic failure alert and action
To Next Page
Loading...
