24
Product usage
B
Before first use
• Clean the product ( CLEANING AND MAINTENANCE).
• Place the product on a stable, flat and non-slip surface.
•
Position the product at least 2 metres away from any flammable objects, such as wooden
fences or garden furniture, and at least 15 cm away from any walls.
Assembly
NOTE:
•
Never use excessive force during assembly or when tightening screws, as
this may damage the product.
• We recommend that you lay out all the barbecue parts next to the assembly
area.
The following is needed to assemble the products (tools are not provided):
• Approximately 45 minutes for assembly
• A minimum of 2 people
• 2 m² outdoor space
• Phillips screwdriver
• Adjustable spanner
• Tape measure
• Place a soft fabric, such as tarp, on the floor where the barbecue will be assembled
to avoid scratching the product during assembly.
•
Secure the barbecue’s left panel I and right panel DD onto the rear panel H, by means
of the M6 x 10 mm bolts EE (x4).
NOTE:
• When assembling parts with multiple nuts or bolts, we recommend loosely
inserting them first, and then, once that particular section of the barbecue
has been assembled, tightening all the hardware with a Phillips screwdriver.
Then move on to the next step in the assembly process.
Secure the front panel with door X to the front of the left and right panels (I and DD), by
means of the M6 x 10 mm bolts EE (x4). We recommend using masking tape to hold the
door in place and prevent it from falling open during assembly.
Insert the foot bases O (x2) into the left front and back feet (P and M).
To Next Page
Loading...