17
EN
Using the appliance
B
*Energy labelling standard programme (EN 61121:2013)
All values in the table were determined in accordance with the EN 61121:2013 standard.
Consumption values may vary from the values in the table depending on the fabric type, spin
speed, environment conditions and voltage values.
Auxiliary Functions
The table that summarises the options that can be selected in programmes is given below.
Option Description
Drying Target
Select the drying target suitable for your laundry to be dried.
Select Extra Dry for thick and multilayer laundry that takes time to
dry. Select Closet Dry for regular, single-layer laundry. Select Iron
Dry for laundry that you wish to leave damp, ready for ironing.
Drying Level
The dampness level obtained after drying can be increased by
another 3 levels in addition to the standard setting. This way, it is
ensured that the laundry is drier. Levels that can be selected apart
from the standard setting (Level 1) 2 (low), 3 (medium), 4 (high). After
selection, light of the relevant drying level turns on.
Delicate Drying* Delicate fabrics are dried in a longer time at low temperatures.
Delayed Start
You can delay the start of the program by selecting a time between
1 and 23 hours. You can press Start/Pause to activate the desired
delay time. When this time is up, the selected program will start
automatically. During the delay time, options compatible with the
program can be activated/deactivated. If you long press the Delayed
Start button, the delay time will change continuously.
Cancel Audible
Warning
The drying machine will give an audio warning when the buttons
are pressed, when the program selection knob is turned and when
the program ends. To cancel audio warnings, press and hold the
“Anti-Crease Option” for 3 seconds. When you press this button, you
will hear an audible warning that indicates that the option has been
activated and the audible warnings stated will be cancelled.
Time Drying
If the program knob is turned to Time Drying, you can press the Time
Drying option button to select it and press Start/Pause to start the
program.
To Next Page
Loading...
