34
EN
Useful information
C
Automatic fault warnings and what to do
Your tumble dryer is equipped with a built-in fault detection system, indicated by a
combination of flashing operation lights. The most common failure codes are shown below.
ERROR CODE SOLUTION
E00 Contact the nearest authorised service agent.
E03 /
Empty the water tank, if problem does not solved, contact the nearest
authorised service agent.
E04 Contact the nearest authorised service agent.
E05 Contact the nearest authorised service agent.
E06 Contact the nearest authorised service agent.
E08
There may be voltage fluctuation in mains.
Wait until voltage is appropriate for working range.
To Next Page
Need help?
General
