VALBERG PS310/E31 User Manual

Safe Digital Lock PS310/E31, PS610/E31 USER MANUAL
www.promet-safe.com
SAFE DIGITAL LOCK
PS310/E31, PS610/E31
FOR MDTB SAFES
USER MANUAL
1 Main Components
Image 1.1 1 – Keypad, 2 – Folding handle, 3 –
Green LED [G], 4 – Red LED [R], 5 – Plastic cover
for emergency power
2 Definitions
2.1 Master Code [PIN1]
A set of numbers (from 6 to 8 digits) which
opens the lock and allows to operate the settings.
Before using the safe, please change the
factory Master code (see par.4.1). It is
strongly recommended to keep the master
code safe from unauthorized people.
No easily guessed numbers (birthdays, house
and phone numbers, etc.) or simple codes (1,
2, 3, 4, 5, 6) shall be chosen for the coding.
Factory Master Code:
1–2–3–4–5–6
2.2 User Code [PIN2]
A set of numbers from 6 to 8 digits which
opens the lock and has limited functions to change
the settings.
The lock with default factory settings does not
have the User code. Please see par.4.2 to set
the User code.
2.3 Signals
[G]
1
Short single acoustic signal with single
green LED flash (3) – confirmation of the button
pressing on the keypad.
[G]
2
Short double acoustic signal with
double green LED flash (3) – confirmation of
successfully finished operation.
[R]-- Long single acoustic signal with single
red LED flash (4) – error message on the user’s
actions.
[R]
5
Short acoustic signal sounds 5 times
with 5 red LED flashes (4) – low battery message.
Please see par.8.1 how to change the battery.
3 Main Functions
3.1 Opening the Lock
3.1.1 Opening with the Factory Master code
[ON][1][2][3][4][5][6][Enter]
3.1.2 Opening with the Master Code
[ON][PIN1][Enter]
3.1.3 Opening with the User Code
[ON][PIN2][Enter]
If the code is right, there will be a green LED
flash and it will be possible to open the door within 5
seconds by turning the handle (2) clockwise.
If you enter a wrong code three times in a
row, the lock will be blocked for 5 minutes.
The blocking of the lock will be indicated
periodical red LED flashes.
3.2 Closing the Lock
Close the door and turn the handle (2) anti-
clockwise until it stops.
4 Service Functions
It is strongly recommended to change the
settings of the lock with the door opened.
After code changing, the lock shall be tested
several times with the secure storage unit’s
door in open state.
The service functions will be unavailable in
case low power supply which is indicated by
the signals, please refer to par.2.3, [R]
5
.
4.1 Changing the Master Code [PIN1]
[ON] [Enter] [1] [Enter] [PIN1] [Enter]
[new PIN1] [Enter] [repeat new PIN1]
[Enter]
Checking the new Master code:
[ON][new PIN1][Enter]
4.2 Changing the User Code [PIN2] with the
Master Code [PIN1]
[ON] [Enter] [2] [Enter] [1-9 (user
number)] [Enter] [PIN1] [Enter]
[new PIN2] [Enter]
[repeat new PIN2] [Enter]
Checking the new User code:
[ON][new PIN2][Enter]

VALBERG PS310/E31 Specifications

General

Brand	VALBERG
Model	PS310/E31
Category	Locks
Language	English

Summary

Main Components

Definitions

Master Code [PIN1]

A set of numbers (from 6 to 8 digits) which opens the lock and allows to operate the settings.

User Code [PIN2]

A set of numbers from 6 to 8 digits which opens the lock and has limited functions to change the settings.

Signals

Describes acoustic and LED signals indicating button presses, successful operations, errors, and low battery.

Main Functions

Opening the Lock

Instructions on how to open the lock using the Factory Master code, Master Code, or User Code.

Service Functions

Changing the Master Code [PIN1]

Step-by-step guide to changing the primary access code for security and system management.

Changing the User Code [PIN2] with Master Code

Process for modifying the secondary user code using the master code for access control.

Changing the User Code [PIN2] without Master Code

Steps to change the user code when the master code is not available or forgotten.

Deleting the User Code

Procedure for removing an existing user code from the system's access permissions.

Time Delay Function

Switching-on the Time Delay function

Instructions for activating the time delay feature with specified delay and opening times.

Opening the Lock with the Time Delay

How to open the lock when the time delay feature is active, including waiting periods.

Switching-off the Time Delay function

Steps to deactivate the time delay feature and restore normal operation.

Dual Code Function

Switching-on the Dual Code function

Guide to activating the dual code entry requirement for enhanced security and access.

Switching-off the Dual Code function

Steps to disable the dual code entry feature and revert to single code operation.

Opening the Lock with the Dual Code

Procedure for opening the lock when the dual code function is enabled, requiring two codes.

Mute/unmute

Servicing

Changing the Battery

Instructions for replacing the lock's battery, including location and types.

Opening the lock when the Battery is Discharged

Procedure for powering the lock externally to open it when the main battery is depleted.