7EN
Using the appliance
B
2. Push four transit bolts towards the inside of the machine, then fully unscrew the transit bolts.
3. Remove the transit bolts along with the rubber part and the plastic shim.
4. To make the machine safe and reduce noise, plug the holes using the plastic caps provided
(see appendix provided with the machine). Push the plugs into the holes and turn them in the
direction indicated by the arrow until they click into place.
IMPORTANT: Keep the transit bolts and the spanner.
They must be put back in position when transporting the
washing machine. To refit them, repeat this procedure
in reverse.
To Next Page
Loading...
