VALBERG WF 1014 A W180C3

To Next Page

To Previous Page

8EN

Using the appliance

Levelling

Ǫ8LI[EWLMRKQEGLMRIWLSYPHFIMRWXEPPIHSREJMVQPIZIPWYVJEGIYWIEWTMVMXPIZIPMJ

necessary). If you want to install the washing machine on a wooden floor, spread the weight by

placing a 60x60 cm plywood board, that is at least 3 cm thick, under the machine and secure

the board to the floor. If the ground is uneven, adjust the four adjuster feet as needed; do not

insert wooden blocks under the feet.

5. Unscrew the lock nut by turning it clockwise (see arrow) using the spanner.

6. Raise the machine slightly and adjust the height of the feet by rotating them.

Higher Lower

7. Important: tighten the lock nut by turning it anticlockwise in relation to the machine.

VALBERG WF 1014 A W180C3 - Levelling