VALBERG WF 1014 A W180C3 - Installing the bottom cover

9EN
Using the appliance
B
Installing the bottom cover
8. Instructions for fitting the bottom noise reduction plate
Ǫ4PEGIXLIJMFVIKPEWWMRXLIGSVRIVSJXLIFSXXSQTPEXI[LIVIMXWE]W4914. Tilt the
washing machine by 30 to 40° to fit the bottom cover. Hold it with the side that has acoustic
insulation pointing upwards and the "PUMP" sign in the corner of the cover near the pump
of the washing machine.
Pump Pump
Ǫ&IJSVIJMXXMRKXLIRSMWIVIHYGMRKFSXXSQTPEXIEPMKRXLIJMFVIKPEWW[MXLXLITVMRXIHQEVO
in the right-hand corner of the bottom plate and glue it (this is not necessary for models
without fibreglass).
Ǫ6IQSZIXLIFEGOMRKTETIVJVSQXLIHSYFPIWMHIHXETISREPPJSYVIHKIWSJXLIFSXXSQTPEXI.
Double-sided tape