30 EN
Useful information
C
1
Use the washing powder scoop (*) supplied with the machine or the measuring plate for
washing liquid to open the pump access hatch.
NOTE
Depending on the amount of water inside the machine,
the collection container may need to be emptied
several times.
CAUTION
The pump may be hot; wait until it has cooled down
before carrying out any maintenance or cleaning
operations.
2
Insert the end of the washing powder scoop or the graduated ruler for washing liquid into the
opening of the access hatch. Then press gently backwards. The access hatch opens
3
Remove any foreign object that may be present in the lter using a soft brush.
4
After cleaning, re-assemble the lter by inserting it and turning it clockwise.
5
When closing the pump access hatch, make sure that the ttings inside the hatch are aligned
with the holes on the front of the machine.
5
Close the lter access hatch.
• Before opening the lter access hatch, place a container underneath to collect the residual
water in the machine.
• Loosen the lter by turning it anticlockwise. Then pull it out to remove it. Wait for the water to
ow out.
To Next Page
Loading...
Need help?
General