6 EN
Using the appliance
B
Adjusting the feet/adjusting the adjustable housings
Electrical connection
To increase the height of the machine, turn the feet clockwise. To reduce the height of the
machine, turn the feet anticlockwise.
• Once the machine is level, re-tighten the lock nuts by turning them clockwise.
Never place blocks made of cardboard, wood or any other similar material under the machine
to level it.
• When cleaning the oor around the machine, be careful not to change the levelling.
Do not install the machine on a surface that could prevent air from owing underneath (e.g.
a carpet).
• For quiet and vibration-free operation, install the machine on a rm surface.
• The machine can be levelled using the adjustable feet.
• Loosen the plastic lock nut.
1
X4
2
3
To Next Page
Loading...
Need help?
General