22
Cleaning and maintenance
C
。
1. Open the Service filter.
2. Open the filter by turning to the counter clockwise.
3. Remove extraneous matter.
4. Close the lower cover cap.
Caution!
•
When the appliance is in use and depending on the
programme selected there can be hot water in the
pump. Never remove the pump cover during a wash
cycle, always wait until the appliance has finished the
cycle, and is empty. When replacing the cover, ensure
it is securely re-tightened.
Trouble Shooting
Whenever there is a problem with the appliance, check if you can solve it following the tables
below. If the problem persists, please contact the customer service.
Description Possible cause Solution
Washing machine
cannot start up
• Door is not closed
properly
• Restart after the door is closed
• Check if the clothes is stuck
Door can’t be
opened
• Washer’s safety
protection design is
working
• Disconnect the power, restart the
product
Water leakage • The connection
between inlet pipe
or outlet hose is not
tight
• Check and fasten water pipes
• Clean up outlet hose
Detergent residues
in the box
• Detergent is
dampened or
agglomerated
• Clean and wipe the detergent box
To Next Page
Loading...
