23
Cleaning and maintenance
C
Description Possible cause Solution
Indicator or display
does not light
• Disconnect the
power
• PC board or
harness has
connection problem
• Check if the power is shut down and
the power plug is connected correctly
Abnormal noise • Check if the fixing (bolts) have been
removed
• Check it’s installed on a solid and
level floor
Error Codes
• Door is not closed
properly
• Restart after the door is closed
• Check if the clothes is stuck
• Water injecting
problem while
washing
• Check if the water pressure is too low
• Straighten the water pipe
• Check if the inlet valve filter is
blocked
• Overtime water
draining
• Check if the drain hose is blocked
• Water overflow • Restart the washer
• Others • Please try again first, call up service
line if there are still troubles
Note:
• After the check, activate the appliance. If the problem
occurs or the display shows other alarm codes again,
contact the service.
Warning!
Risk of electric shock
•
Never try repair an appliance which is defective of
presumed to be defective. You may put your own and
future users’ lives in danger. Only authorised specialists
are allowed to carry out this repair work.
•
Improper repair will void the warranty and subsequent
damages can’t be recogniced!
To Next Page
Loading...
