21
EN
Using the appliance
B
To start the selected program, press the Start/Pause button. When the machine is in standby
mode, the Start/Pause indicator light on the electronic display ashes.
The Child Lock function locks the buttons so that the selected washing cycle cannot be
changed unintentionally. To activate the Child Lock, press and hold buttons 2 and 3 at the
same time for at least 3 seconds. The "CL" (Child Lock) symbol ashes on the electronic
display for 2 seconds when the child lock is activated.
If one of the buttons is pressed or if the selected program is changed using the program
selector while the child lock function is activated, the "CL" symbol starts ashing on the
electronic display for 2 seconds.
If the program selector is set to OFF and another program is selected, while the Child
Lock is activated and a program is already running. The previously selected program will
continue where it left off.
To disable the child lock function, press and hold buttons 3 and 4 simultaneously for at least
3 seconds until the "CL" symbol disappears on the electronic display.
NOTE
If you want to select the auxiliary function, and if the
auxiliary function LED is not on, it means that this
function is not used in the washing program you have
selected.
• Start/Pause button
• Child safety
To Next Page
Loading...
Need help?
General