27
EN
Useful information
C
• Unscrew the water inlet hose(s) at the washing machine.
• To remove the lter mounted on the water inlet valve, use needle nose pliers to gently
pull on the plastic bar inside the lter.
• A second lter is mounted on the end of the water inlet hose to be connected to the tap.
To remove the second lter, use needle nose pliers to gently pull on the plastic bar inside
the lter.
• Thoroughly clean the lter using a soft brush and wash with soapy water. Then rinse
thoroughly. Reinsert the lter, by pressing on it lightly.
CAUTION
Filters fitted to the water inlet valve can get
clogged as a result of poor water quality or lack of
maintenance. This may cause water leaks. Such
incidents are not covered by the warranty.
Drain pump lter
1
2
3
4
5 6
The washing machine's drain pump lter system prolongs the lifetime of the pump by
preventing lint from getting inside. We recommend cleaning the drain pump lter every 2
months. The drain pump lter is located behind the access hatch in the lower right corner
of the front of the machine. To clean the drain pump lter:
To Next Page
Loading...
Need help?
General