62
Product usage
B
Reload
This operation can be executed during the washing progress. When
the drum is still rolling and there is large amount of water with high
temperature in the drum. The state is unsafe and the door cannot be
opened forcefully. To press [Start/Pause] for 3 sec. to reload, and start the
clothes adding in the midway function. Please follow the steps as bellow:
1. Wait until the drum stops rotation.
2. The door lock is unlocked.
3. Close the door when the clothes are reloaded and press the [ ]
button.
Reload the clothes
Start
Press[ ]3sec.
Caution!
•
Don’t use the Reload function when the water level over the edge of the inner
tub or the temperature is higher.
Note:
Usage counter
1. Unplug the equipment for 10s and reconnect again.
2. Power on and within 10s, please press [Delay] and [Boost] on control panel
simultaneously and continuously for around 5s until the device display shows
digits -- the value can indicate the times of equipment usage.
3. Repeat step 1 again and customer can resume to normal operation.
To Next Page
Loading...
