61
Product usage
B
My Cycle
To memory the frequently used programme.
After choosing the programme and setting the options, press
[Spin] and [Stain Master] button 3 sec. before start to wash.
The default setting course is Cotton.
Child Lock
This function is meant to keep children from misusing the controls.
Press [Option] and [Boost] simultaneously for 3 sec until
the buzzer beep. The child lock indicator switches on.
Caution!
•
When the Child Lock is activated, the display will alternately show “CL” and
the remaining time.
• Pressing any other button will cause the Child Lock indicator to flash.
• When the program ends, “Cl” and “END” will alternate on the display.
•
The Child Lock deactivates the function of all buttons except the On/Off button
and the Child lock button!
• Only the simultaneous pressing of the two buttons [Boost] and [Options] can
deactivate the Child Lock!
• Please deactivate the Child Lock before selecting a new program!
Mute the buzzer
Choose programme
Press the [Stain Master] and [Option]
button for 3sec., the buzzer is mute.
To act the buzzer function, press the button again for 3 seconds. The setting
will be kept until the next reset.
Caution!
• After Muting the buzzer function, the sounds will not be activated any more.
To Next Page
Loading...
