Valcom InformaCast VIP-801A-IC User Manual

1 947831
CAUTION: To reduce the risk of electric shock,
Do not remove cover.
No user serviceable parts inside.
Refer servicing to qualified service personnel.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
Issue 1
VIP-801A-IC
InformaCast
®
Compliant
Network Audio Port
INSTALLATION
Mounting
The VIP-801A-IC is designed for wall or table
mounting.
Table: Provided with the VIP-801A-IC are four
rubber pads. Peel the pads from their carrier
backing and place at the four corners of the
bottom of the unit.
Wall: Using the brackets and screws provided,
secure the VIP-801A-IC to the wall.
INSTALLATION
FCC Information
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This
equipment generates, uses and can radiate
radio frequency energy and if not installed
and used in accordance with the instruction
manual, may cause harmful interference to
radio communications. Operation of this
equipment in a residential area may cause
harmful interference in which case the user
will be required to correct the interference at
his own expense.
Precautionary Designations
Power Connections
The preferred method of powering a
VIP-801A-IC is via a power over Ethernet switch
meeting the 802.3af specification. If the rear
panel barrel connector is used for power, the
preferred power supply is a Valcom VIP-324D.
Make all required signal connections before
applying power to the unit. If powering via
802.3af Power over Ethernet (PoE), make sure
all signal connections via the back panel are
made then connect the VIP-801A-IC to the
Ethernet switch.
If power is supplied via the barrel connector,
make sure all signal connections are secure.
Attach the unit to the network via the front panel
RJ-45 Ethernet connector. Apply power by

Valcom InformaCast VIP-801A-IC Specifications

General

Brand	Valcom
Model	InformaCast VIP-801A-IC
Category	Network Hardware
Language	English

Summary

Installation and Safety Information

Mounting Instructions

Details wall and table mounting procedures using provided pads and brackets for the VIP-801A-IC unit.

FCC Compliance Statement

Information on Class A digital device compliance and potential interference in commercial/residential environments.

Power Connection Methods

Explains preferred power methods via PoE or barrel connector and connection sequence for optimal operation.

Precautionary Safety Designations

Highlights electrical shock risks and importance of referring to literature for servicing and maintenance.

Connectivity, Setup, and Support

Network Connectivity

Connects the VIP-801A-IC to an Ethernet switch using a standard RJ-45 patch cable.

Signal Connection Details

Details rear panel signal connectors including audio outputs and form C relays for system integration.

Audio Output Configuration

Describes 'Page' and 'AUX' audio outputs for Valcom speakers or amplifiers, specifying capacity and compatibility.

DIP Switch Functionality

Explains DIP switch functions for controlling supervision signals on the 'Page' audio output line.

Status Indicator Light Guide

Details the meaning of STATUS, Green (Link), and Yellow (Activity) LED indicators on the front panel.

Automatic Network Setup

Device automatically acquires IP via DHCP and connects to InformaCast server upon network connection and power-up.

Technical Assistance Channels

Provides factory contact information for assistance via phone and email, and suggests website review.

Valcom Limited Warranty Information

Warranty Coverage Terms

Covers defects for one year, limited to repair/replacement, excluding damage from misuse or alteration.

Warranty Exclusions and Disclaimers

Excludes consequential damages, implied warranties, and damage incurred during shipment; advises immediate carrier notification.