Valcom V-450 Installation Instructions

Issue 8
1 947345
V-450
DYNAMIC OMNIDIRECTIONAL
GOOSENECK MICROPHONE
INTRODUCTION
These instructions contain the specifications and
information necessary to install, operate, and
maintain the V-450 Dynamic Omnidirectional
Gooseneck Microphone.
SPECIFICATIONS
Applications
 Valcom Paging Systems
Features
 Dynamic element
 Omnidirectional pickup pattern
 Chrome screen with a black housing
 4 foot, 4 conductor, 2 shielded cable with
cable permanently attached
 Pushbutton sealed micro switch
 5/8"-27 mounting thread
 Mounting flange included
 Low impedance (balanced)
Dimensions/Weight
 Microphone 1-3/4"D x 4-5/8"L
 Gooseneck 19"L
 1.3 lbs. (.59kg)
Specifications
 Element Dynamic
 Pattern Omnidirectional
 Freq. Response 50 to 12K Hz
 Output Impedance Lo Z 400 Ohms
 Output Level Lo Z -58 dB
(0db = 1 mw/10 microbars)
-152 dB EIA
INSTALLATION
Figure 1 shows the V-450 connected to the
Valcom V-9939C microphone adapter.
TECHNICAL ASSISTANCE
Assistance is available from the factory when
problems are encountered. Call (540) 563-2000
and press 1 for Technical Support, or visit our
website at http://www.valcom.com.
Valcom equipment is not field repairable.
Valcom, Inc. maintains service facilities in
Roanoke, VA. Should repairs be necessary,
attach a tag to the unit clearly stating your
company name, address, phone number,
contact person and the nature of the problem.
Send the unit to:
Valcom, Inc.
Repair and Return Dept.
5614 Hollins Road
Roanoke, VA 24019-5056

Valcom V-450 Specifications

General

Brand	Valcom
Model	V-450
Category	Microphone
Language	English