Valent Controls IOM 60 IOM-C1-0616
Part Number 474626
3. Use the suggested station name. Select
Next.
4. Select Copy every file, then select Next.
5. Select Finish.
6. A pop-up indicates that the existing station is
being saved. This screen automatically
closes.
WARNING: Clicking the Abort button cancels the
station transfer and could damage the internal
software. Do not press Abort unless
instructed by the factory.
7. When the file transfer is complete, select
Close.
Downloading from the PC to the Controller
1. Click on the desired station from the list on
the left side of the screen.
2. Select
Copy to start the station transfer
wizard and download the station from the
PC to the controller.
3. Use the suggested station name. Click on
Next.
4. If a station is already present in the
controller, the wizard warns that the existing
station will be replaced by the new one,
which is correct. Click on Next.
To Next Page
Loading...
Need help?
General
